Steeliner plastic sheets for sub-floor are distinguished by their great capacity to support impacts, humidity and chemical agents. Resistant to extreme weather temperatures, ideal to avoid corrosion. These Steeliner plastic sheets for sub-floors they have great tension resistance, which reduces vibrations and avoids fractures.
Features & Benefits
- Resistant to impacts, humidity and chemical products
- Resistant to extreme weather temperatures
- It does not corrode
- Great traction resistance
- Reduce vibrations
- Prevents fractures
|Flexion resistance||18,096 PSI||D-790|
|Flexion module||650,000 PSI||D-790|
|Tension resistance||9,247 PSI||D-638|
|Tension module||1,000,000 PSI||D-638|
|IZOD impact||9.6 Ft. Lbs.||D-256|
Notes: Stabilit subpan is available in bulk coil, 250 to 700 linear feet as well as cut-to-length sheets can be interlapped into one coil for customer convenience. Material can also be coiled with embossed side facing inside or out.
CARE AND MAINTENANCE
Stabilit’s transportation sheets may be cut using an electric saw with carbide tip or a cutting disc. Be careful and always use protection glasses and a mask with filters when cutting sheets.
Follow the industry procedures for clamping, either this mechanic and/or with the use of adhesives.
Every Stabilit’s transportation sheet should be stored inside, in a fresh and dry area. In case of allowing humidity to enter between the sheets, in may cause its expansion and/or discoloration
To make sure that Stabilit’s sheets for transportation stays clean and glowing, we recommend a periodic cleaning with warm water and soap or steam.