Stabilit is one of the most important companies worldwide in the manufacturing and commercializing of plastic sheets reinforced with fiberglass with more than 55 years of experience and international presence through its subsidiaries, local leaders, in USA, Canada and Europe. Resolite CR (FS25A) resistant sheets were developed by our subsidiary Stabilit America in its Resolite division, the company is recognized on the manufacture and development of plastic sheets for high specification construction.

Resolite, founded in 1951, was the first company to offer engineer solutions on plastic sheets for the most exigent architects, engineers and constructors in the Construction market; in addition, it was the first one to introduce plastic sheets with the flame-retardant option (Resolite CR) and approved by Factory Mutual (Resolite CR- RFM).

Resolite CR (FS25A) resistant sheets are available in large variety. Surely you will find the optimal version for your specific requirements.

Láminas resistentes Resolite CR translúcido

Resolite CR Translucent

Resolite CR (FS25A) Translucent high specification resistant sheet is made of polymer and reinforced with fiberglass (FRP) of great resistance and with UL 25 flame classification. Resolite CR resistant sheets were specially developed for natural lighting on walls and roofs for the high specification industry. Available in Series 30 (30% fiberglass) and Series 40 (40% fiberglass) and great variety of models, from 840 (8 oz/ft2 nominal) up to 1440 (14 oz/ft2 nominal). Series 30 has C/W barrier, which is an available option for exterior and interior surfaces. C/W barrier is a high range solution to improve weathering resistance of FRP sheets and is superior to high volatile coatings applied by sprinkling, that erode and disappear in a short time.
Lámina resistente Resolite CR opaco

Resolite CR Opaque

Resolite CR (FS25A) Opaque is a resistant sheet of reinforced polymer with fiberglass (FRP) of great resistance and with flame classification UL 25. Resolite CR resistant sheet was especially developed for roofs and walls of the high specification industry. Available in Series 30 (30% fiberglass) and Series 40 (40% fiberglass) and great variety of models, from 840 (8 oz/ft 2 nominal) up to 1440 (of 14 oz/ft nominal square). Series 30 has a C/W barrier which is an available option both for exterior surfaces as for interior. The C/W barrier is a high range solution to improve weathering resistance of the FRP sheets and is superior to high volatile coatings applied by sprinkling, that erode and disappear in a short time.
Lámina resistente opaca resolite cr rfm

Resolite CR RFM

Resolite CR-RFM resistant sheet was designed to provide a lighting able to support a classification with fire approval form Factory Mutual for walls, roofs and ceiling applications without requiring sprinklers protection. These resistant sheets were proved by the Factory Mutual Investigation Center and have passed Corner Test of Factory Mutual, both for 25’ as for 50’ feet. Both were conducted in clears of minimum 1.82 m (6’0”) to simulate real world conditions. According to the FM 4880 standard, the Resolite RFM resistant sheet has been approved for a use without restrictions as wall or roof without height limitations or spray protection. Resolite RFM resistant sheet also reached the Wind Suction Classification I-90 and passed the Factory Mutual tests of severe hail risks. Summarizing, Resolite’s sheets 11, 14 and 17 has accomplished the ASTM E 108 and has accomplish a Class B classification with a maximum slope on the ceiling of 3 in 12. The isolated system of Resolite RFM resistant sheet was also approved and also complies with the approval requirements FMRC Class 4453/4420.
close

Cuéntanos tu experiencia con Stabilit

Califícanos aquí

star star star star star
close

Tu opinión es muy importante

Por favor responde este breve cuestionario para seguir mejorando nuestros productos y servicios.

En escala de 0 a 10, donde 10 es muy probable y 0 nada probable

0 1 2 3 4 5 6 7 8 9 10